Scaltrol’s water scale solutions are designed to control mineral scale rom water sources that cause corrosion and scale build up in hot water pressure washers and steam cleaners.
Without a preventative scale control, your hot pressure washer steamer will eventually become clogged with scale-sometimes past the point of repair.
Since most water sources are saturated with large amounts of minerals, including calcium carbonate (lime scale), calcium sulfate, iron, and manganese, the Scaltrol unit is installed at the water supply. It can treat the whole building or at point of use.
How It Works
Scaltrol scale control units dispense a measured amount of plyphosphate which deposits a microscopic film to all surfaces.
The mineral molecules have a positive charge and are attracted to – and held in suspension by – the negative charge of the polyphosphate, which acts as a sequestrant. Since the mineral molecules are no longer able to bind together and scale can not form.
Model SC50 will treat 50,000 gallons of water. Model SC100 will treat 100,000 gallons of water. And finally, big Bertha-model SC500 treats 500,000 gallons of water. These units are for cold water applications at the inlet of your pressure washer. The polyphosphate is the white stuff you see that looks like a filter. This product will slowly lower in the cartridge until it is empty. You then order a replacement cartridge and change it out. Installation for the assembly and cartridge are very simple.
Click here for installation information.Additional Service Areas include: Pressure Washers Boise Idaho, Pressure Washers Portland Oregon